There are various ways attached to make the cars clean and the developing technology has also make many products to make them as fresh as the new one.
More and more average cruiser and car buffer have started asking about using a clay bar on the car to make clean and enhance the finish. It seems that people think that using a clay bar is some sort of guarded detailer secret or trick. But the fact is that people still have not understood the exact meaning of the product.
Let’s understand the theme first. To use a clay bar first set aside the good part a day or two depending on how much of the vehicle you want to work on. This is not a quick process. What a clay bar does is pull out and shear off embedded particles and surface-born contaminants with a safe and effective lubricated mechanical action. The clay bar must be sliding on a lubricant or it will stick to the paint.
During the process knead the bar regularly. If you drop the clay bar throw it away as it may pick up any dirt off of the ground and then transfer it to the car which may scratch your finish. So, better is to use only a section of the clay bar while working, not all of it at once. After applying the lubricant simply rub the portion of Clay Bar lightly across your vehicle in small two-foot by two-foot sections. You don’t want to do too large of an area at a time because the lubricant will dry before you cover the entire section.
Jax Wax’s Clay Bar is pliable and not as stiff as other clays. It will be easier then to use and remold the Clay Bar. Jax Wax's Clay Bar works well on plastic, trim and glass as well as on matte-finish plastics that are free of coatings. Because Clay Bar is so effective at removing deposits from your paint it also removes wax as well so be prepared to re-wax the areas on your car that you applied the clay bar to.
This was the way to use the clay bar and make such use which can have a proper use and utility.
| 
Used Car Dealers
